Sony Ericsson V640i review

[fukmondo]

Izašao je novi soft na seus-u, puknuo ga gore čini mi se sve isto jedino sad postoji u media playeru pod opcijama ikona ažuriranje multimedije koja služi tome ako se nešto s kartice ne vidi u plajeru da ažurirate sadržaj bez resetiranja moba. Od sranja izgleda mi bug koji kad je media player u pejsažnom prikazu kad pokrenete novu stvar prebaci na ttren stvar u portret mod i onda ga vratiu pejsaž , funkcionalno nije problem ali ide na jetra moraju nešto usrat. Zasada to je to nisam još ništa drugo primjetio, malo mi se zvuk učinio slabiji i škripaviji ali to kod mene oće na nervnoj bazi .
Zvuk škljocaja kod foto aparata i dalje se može isključiti.

Soft se ukazuje kao 1200-4926 R1FA032 080516 a gore je prije bila verzija R1EA030.

Od novosti fon definitivno radi s karticom od 8 gb, na davinci team stranici se za kakvih 70 kn može otključati, debranding ide tako što se gore kresne soft od k630i što je zapravo isti telefon http://www.gsmarena.com/sony_ericsson_k630-2146.php, a ovaj naš je verzija za vodafone i razlika je samo u softu, koliko vidim još uvijek ništa nema džabe ni u stare babe mada sam naletio na nekakvo šuškanje da je polako počelo besplatno za ovu platformu.

[n00b]

Nemam V640, pa nisam isprobavao, ali jesi probao ovo:
http://www.cafe.mobil.hr/showthread....630#post832035 (V640 -> K630)

[fukmondo]

A hvala ti ;. Mene zapravo baš i ne smeta soft koji je na fonu mada nebih imao ništa protiv to napraviti kad bih bio siguran da će sve biti jednako kao i dosada ili bolje odnosno da ću se moći vratiti na staro. Mene bi najviše zanimao unlock ali koliko vidim toga nema djaba.U svakom slučaju hvala sve sam poskidao i prije ili poslije mi vrag neće dati mira tu si me dobio

[fukmondo]

Evo neki dan sam usvirio to napraviti pa sam danas ukebo par minuta i napravio to i s bluetoothom.

Stvar je korisna za skidanje stvarčica koje koriste pristup netu kao gogle maps i slično pa možete skinuti i keširati karte koje trebate npr., pa recimo knjige i sve ostalo što se skida netom, a nezgodno je ili neizvedivo skinuti na pc i onda kopirati na mob, dakle ima to i smisla. Drugo što je zgodno to je da čovjek do mile volje izguštira surfanje na mobu djabe i vidi kako to izgleda imati wifi koji nemamo, i zgodno je recimo (kod mene kanta stalno radi) ili ako je kanta zauzeta, a baš hoćete vidjeti koga ima na fejsu ili pogledati mail, a ne diže vam se dupe iz fotelje itd. Bluetooth sasvim fino pokriva cijeli stan, a bome mogao bi i kuću.Ovisi kakav dongle imate.Cijela priča radi na telefonima koji podržavaju PAN konekcije, a tu spada i v640i odnosno K630

Dakle v640i može koristiti vezu s pc-ja na net usb kabelom i to je prilično jednostavno evo kako tko nezna engleski ima slike

http://forums.se-nse.net/index.php?a...r&f=50&t=22088

evo i teksta

http://forums.se-nse.net/index.php?s...&mode=threaded

dakle garantiram vam da ovo radi.

Bluetooth je malo čupaviji jer radi se o proizvođaču čipa za bluetooth dongle i softweru odnosno driveru za isti.

Određeni donglei (bluetooth reciveri) podržavaju pan ali samo u jednom smjeru isto je i sa softom i tu jednostavno nemožete ništa. Trebate imati dongle s broadcommovim čipom ili takav koji je kompatibilan s widcomm softwareom.Inače se možete je... možda je i tako moguće ostvariti konekciju ali meni nije uspjelo. Dakle prvo deinstalirate potpuno drivere preko device managera od vašeg donglea izvadite dongle, (cijelo vrijeme govorim zapravo o onom usb pimpeku koji daje vašem kompu opciju da prima bluetooth signal) isto ako imate ugrađen na laptopu isključite ga ili iskopčate, sad instalirate widcomm 5.1.0.2700 driver i software uz malo guglanja ćete naći sve ali evo ovo što sam popamtio:

64 bitni
http://rapidshare.com/files/7270107/...0_x64.rar.html
32 bitni (xp vulgaris)
http://rapidshare.com/files/7408475/...0_x86.rar.html

zatim trebate upute jer ih nema ni u jednom paketu, a par stvari se mora napraviti da uvjerite widcommov soft da radi s uređajem za koji nije pisan niti prodan pa trebate

Widcomm_patcher_v2 tu ga imate
http://rapidshare.com/files/15112897...Incl.Patch.rar



njega ćete naći u starijim paketima samo upišite u google i na par foruma skinite stariji paket verziju 2500 i upakiran je unutra. Staviti ću link kad se sjetim gdje sam to našao.

Najbitinija vam je uputa gdje je opisano što se radi ukratko prvo preimenujete dva fajla u windowsima i tako spriječite windoze da instaliraju svoj driver koji sve usere, onda preradite inf file u samom widcom softwareu tako da prepozna vaš uređaj (dongle) i instalira drivere za njega inače ga neće pronaći i neće raditi s njime, instalirate soft kad vam kaže da nema uređaja umjesto ok ili uključivanja uređaja kažete cancel i ovaj se instalira bez uređaja, restartate u safe mod, pokrenete patcher i popačate 4 fajla dva u program files widcomm folderu dva u windows system 32 restartate i sad uključite bluetoth na računalu. POkrenete soft i kod konfiguracije izaberete network acess i u konfiguraciji postavite na dozvoli drugim bluetoth uređajima da se spajaju na internet i lan preko ovog pc-a to je ključno i to je ono što jedino widcomm software omogućava. Uparivanje preskočite njega napravite s telefona dodajte uređaj u mob vidjet ćete da je ikona u treju pozelenila kliknite i unesite kod i to je to. Sad imate u network connection bluetooth network i vaš lan pokrenite setup small office network izaberite opciju ovo računalo se direktno spaja na internet i dozvoli drugima da se spajaju preko njega izaberite vašu mrežnu karticu nakon toga izaberite bluetooth network blabla (ne modem ni dial up) i kad to samelje vaš pc imat ćete šeranu konekciju. Na telefonu sad u postavkama odaberete vaš pc kažete poveži čujete zvučni signal kliknete na ikonu u treju i upišete kod kažete da uvijek dozvoli ovom uređaju spajanje itd. i sad ste spojeni na stroj na mobu imate naravno već instaliranu (što čekate) operu mini 4.2 advanced, a u streamin podešenjima kao konekciju ste izabrali konekciju s oznakom bluetotha i imenom vašeg pc-a koja se tamo sama stvorila i to je to. Evo kom je ovo zbrkano i linka tu na forumu pa će od dve upute ispast jedna dobra

http://cafe.mobil.hr/showpost.php?p=728247&postcount=5

bitno je dakle nova verzija widcomma, ispravna instalacija i redoslijed, upariti ih s telefona ne nikako s kompa, kod povezivanja kliknuti na ikonu u trayu i onda se povežete i veza drži u svim ostalim slučajevima sve je u redu ali konekcija pada i ne stvara vam se nova konekcija odnosno račun na mobu tek je novi soft i dosljedno praćenje uputa riješilo stvar. Na netu ima sto metoda ali ovo je stvarno uz pravi soft jednostavno ali strogo se morate držati uputa.

[fukmondo]

Evo i uputa za instalaciju widcomma one su ključne a teško ih je nać

http://forum.gsmhosting.com/vbb/showthread.php?t=342643, jako je bitno da svoj uređaj jednostavno dodate tako da kad je jednom instaliran i radi s njegovim originalnim odnosno windows driverima samo kopiratei control panela device menager bluetooth devices desni klik devices i to izgleda otprilike ovako USB\VID_045E&PID_009C to je oznaka vašeg uređaja i to trebate unijeti u siftware prije instalacije u btwusb.inf file na tri mjesta da stvar proradi s vašim uređajem.

evo ravilov pa ti pobriši engleski šta ja znam ja bih im ostavio upute ali istina bog ovo nije eng forum ja prevest nemam kad pa ti vidi

****
This guide is not made by me, I got it from gsmhostings. I think it is made by illusion (but sorry if I’m wrong). I did make some minor adjustments and improved it a little. Also created this full pack:
1. Widcomm 5.1.0.1100
2. Licence Pathcer v2
3. And included this guide to help you
I packed this into one torrent download, so that you can easily get it. No rapidshare and other sh*ts.

A big-big thanx goes to people who made this guide, the pathcer and all the hard work!!!!!! Check out the site: http://forum.gsmhosting.com/vbb/forumdisplay.php?f=237



********* by gurabli



How to install Widcomm drivers

What you will require:
1. Widcomm drivers (search the forums and locate the ones of your choice in this guide, I am using version 5.1.0.1100 obtained from: http://forum.gsmhosting.com/vbb/showthread.php?t=294359)
2. Widcomm patcher v2 (obtained from: http://allbt.land.ru/Widcomm_patcher_v2.rar)
3. Optional: Your original bluetooth drivers
Step 1 (Preparation)

First things first, if you have some bluetooth drivers already installed, you should find out who the manufacturer of your device is. This is because Widcomm/Broadcom 'broke' compatibility with other manufacturer's devices from version 5.1.0.1100 onwards. If you are not sure, I would recommend downloading 5.1.0.1100 just to be sure (http://forum.gsmhosting.com/vbb/showthread.php?t=294359)

Next step is to obviously uninstall your current drivers (if you have any), which can be done from the Add/Remove Programs bit in Control Panel. Also, remove any bluetooth device drivers by using device manager in System (found in Control Panel):
1. Go to Control Panel, double click on 'System'
2. Click on 'Hardware' tab, then 'Device Manager'
3. In there, expand any bluetooth devices and right click and select 'uninstall' (Repeat for all Bluetooth)
Now you may unplug your bluetooth device while we proceed.

Step 2 (Preventing Windows native Bluetooth Stack)

Then, you should remove prevent the Windows native bluetooth working:

Make sure that you have enabled viewing of hidden/system files:
1. Press Windows key + 'e' key at the same time (Windows Explorer pops up)
2. Click on Tools (Menubar) > Folder Options... > View (Tab):
3. Enable 'Show hidden files and folders'
4. Uncheck 'Hide extensions for known file types'
5. Uncheck 'Hide protected operating system files (Recommended)' - you might get a warning, click Yes/OK
6. Click on OK to exit.
Now, go to C:\ Drive, Windows directory, 'inf' folder, in there you will find two files, bth.inf & bth.pnf.

Rename both of these to bth.inf.old & bth.pnf.old (in each case, confirm with the pop up box). (Left click to highlight the file and press F2 to edit the filename)

Now restart your computer.

Step 3 (Getting your USB Bluetooth drivers ready)

The next step is to find out if you have the original drivers for your bluetooth adapter. If you do, get them and on the CD, look for a file called 'btwusb.inf' which contains the information required to install your bluetooth adapter later on. If you get that file, copy it into the Win32 & Win64 folders of the Widcomm drivers folder. It should ask you if you want to overwrite, select yes.

If you don't have your original bluetooth manufacturer drivers and you can't get them off the internet, then here is what I did:

First of all plug in the adapter and let windows discover the device and let windows try to install it, but it will fail. Uncheck the 'Don't ask me next time'.
1. Go to Control Panel, double click on 'System'
2. Click on 'Hardware' tab, then 'Device Manager'
3. In there, locate the Unknown (yellow) hardware device, expand it and double click on it.
4. Click on the 'Details' tab and in there you should see a line similar to this: USB\VID_13DD&PID_0001\012B4A-5B-0002
The numbers might be different, but what we are interested in are the VID_XXXX&PID_XXXX (XXXX = 4 digit number).

Make a note of them and then in the Widcomm drivers folder, under win32 folder, open the btwusb.inf for editing (prefereably in notepad). Now we will manually add our device.

First things first, in the btwusb.inf file, do a quick search for your VID number (e.g. 13DD) and see if there are already matching entries for your device - make sure that the VID number and PID number are both correct.

If so, then you don't need to edit the file. To search (if you are in notepad, press 'CTRL' (key) + 'f' key at the same time and type in your VID number and click on 'Find Next')

If you haven't located your device, then proceed:

There are three lines to add:

-In [ControlFlags] section:
-Add a line: ExcludeFromSelect=USB\VID_XXXX&PID_XXXX (change the XXXX with the numbers from your device)

-In [WIDCOMM.NTx86.5.1] section:
-Add a line: %****.DeviceDesc%=BTWUSB, USB\VID_XXXX&PID_XXXX ; My BT USB Dongle

Where the **** is a string or single word in CAPITALS (e.g. your manufacturer's name ITECH) and the XXXX's are the same numbers as before (VID & PID respectively).

Finally, in [Strings] section:
- Add a line: ****.DeviceDesc="My BT USB Dongle"

Where **** must be the same word used in the previous step (again in CAPITALS) and the bit between the quotes can be anything you like - it will be used to display whatever your BT adapter is called in Device Manager. Try to stick with just spaces and letters.

Now you can save the file and proceed with installation.

Step 4 (Installing the Widcomm drivers)

Now you are ready to install the Widcomm drivers, once again, under the folder, double click on setup.exe and the process should begin. Confirm whenever it pops up with the 'Warning, not digitally signed, continue?' box and mid way through when it says no bluetooth adapters found, just click cancel to proceed anyway. Once it has finished, you must restart the computer in safe mode to patch the bluetooth drivers.

Step 5 (Patching the Widcomm drivers)

Restart your computer and while it's booting up (you can see the black bios screen where it detects your CPU, hard drives, etc), press the F8 key repeatedly, maybe once every half a second, keep doing this and instead of Windows loading up, you will see a list of options. Select the option at the very top 'Safe Mode' and press enter. On entering safe mode, select 'Yes' to continue.

Now locate the Widcomm_patcher_v2.exe program and double click on it. you will see three little dots next to 'BTStackServer.exe', click on those three dots and then navigate to (C: )Local Disk > Program Files > WIDCOMM > Bluetooth Software. In there you will see a file 'BTStackServer.exe'. Double click on it and the file should begin patching. (Select ok to continue)

[fukmondo]

Next, another file appears, do the same as above, but this time the file is called BTTray.exe. Again, click ok once it's been patched.

The third file to be patched is found in (C: )Local Disk > Windows > System32. It's a .dll file, but it's the same process as the above two steps. The forth step is also in the same location (another .dll file).

Once this is done, you may reboot your computer again.

Step 6 (Installing your Bluetooth USB drivers)

You should notice that you have a 'My Bluetooth Places' Desktop icon as well as a little bluetooth icon in the system tray (that's red). We are nearly there. All we need to do now is to plug in your bluetooth device and Windows should pop up with a 'New hardware found' box. Click on Advanced install and uncheck everything except for 'search this specific folder' (not the exact words), and click on browse. The in the new window, navigate to C: Drive > Program Files > WIDCOMM > Bluetooth Software > bin, then click on OK and it should begin installing your device automatically.

Once that is done, you should notice that your bluetooth icon in the system tray has now turned from red to white. You can double click on the icon and it should pop up with a wizard to guide you through the initial bluetooth setup process. Now you can start using pairing and using your bluetooth devices!

Some FAQs

Q: I can't be arsed to read this whole thing, is there a shorter way?
A: Probably, but this is what I did and it works.

Q: Where can I get the latest Widcomm drivers from?
A: search the forum. (Tip: search for word 'Widcomm' in this bluetooth forum)

Q: I don't have/lost my bluetooth drivers, can I still use this guide?
A: Yes, check second part of step 3

Q: I've done everything, but bluetooth seems to be flaky and I'm having problems with my bluetooth devices.
A: Check who the manufacturer of your bluetooth device is by right clicking on the bluetooth icon in the system tray, select 'Bluetooth Configuration' and then click on the 'Diagnostics' tab. In there, it will tell you the manufacturer of your bluetooth device. If it says 'Cambridge Silicon Radio' (CSR for short), then it's best to stick with the Widcomm drivers versions 5.1.0.1100 or lower. Later versions are known not to work very well with CSR manufactured devices as well as others. Reinstall with another version of the Widcomm drivers.

Q: I can't get into safe mode!
A: Hit the F8 button a bit quick multiple times as your computer is booting up (right from the very second you push the power on button). The menu should appear.

Q: I can only see btwusb, not btwusb.inf?
A: Make sure that 'Hide extensions for known file types' is turned off as per step 2 instructions.

Q: How do you open .inf files for editing in notepad?
A: Right click on the file and select 'Open with...' in the list, scroll down to notepad, left click on it and then set if you want notepad to open .inf files all the time, then select OK. Notepad should open the inf file now.

Q: There is a licence patcher (WidcommLicensePatcher), what does it do and how do I use it?
A: I don't know how to use it, maybe someone can contribute. However, I know that in effect it's supposed to authorise your USB Bluetooth device to use the Widcomm drivers, as outlined in step 5. You can do either or, you do not need to do both to get things to work.

For VISTA users:


Small update - this installation method is still valid and for many the best choice since the new widcomm stacks (above 1100) including the latest 3600 remove a wide range of compatibility.

Windows Vista users, version 5.1.0.1100 is fully compatible however in order to patch the two system32 files ownership of those files and permissions need to be modified. Do so by invoking following commands in command prompt (cmd run as admin)

takeown /f C:\Windows\System32\BTNeighborhood.dll
cacls C:\Windows\System32\BTNeighboorhood.dll /G username:F

where username is the current windows user name

If you can’t patch the two files in System32 dir, you may want to copy them to a place other than “C:” and than use the patch. After, it may happen, that you can’t delete or overwrite the ones in System32 with the patched files than you simply rename the ones in System32 to .bak and copy the patched ones. It will work for 100%

****
This guide is not made by me, I got it from gsmhostings. I think it is made by illusion (but sorry if I’m wrong). I did made some minor adjustments and improved it a little. Also created this full pack:
4. Widcomm 5.1.0.1100
5. Licence Pathcer v2
6. And this guide to help you
I packed this into one torrent download, so that you can easily get it. No rapidshare and other sh*ts.

A big-big thanx goes to people who made this guide, the pathcer and all the hard work!!!!!! Check out the site: http://forum.gsmhosting.com/vbb/forumdisplay.php?f=237



********* by gurabli

[fukmondo]

Ovdje je malo kompliciraniji sistem i po meni nepotreban jer stvar radi nakon instalacije softa i podešavanja telefona bez ikakavog podešavanja adresa i dhcp servera al ko voli komplicirati evo linka

http://www.topsony.com/forum/softwar...oth-t5977.html

za kraj kod mene radi verzija softa 2.700 popatchana sa patcherom v2, a dongle je od microsoftove tipkovnice i miša koji inače originalno niti radi s widcommom , a sam po sebi daje pan samo u smjeru pc-telefon, s pravim softwareom radi ko zmaj.

Evo sreći nema kraja.

tu sam malo pričao o kvarovima na soniću toniću, http://cafe.mobil.hr/showthread.php?p=846769#post846769

[fukmondo]

A ovo vam pisem sa mog mocnog sonica tonica sa cenife dve sobe dalje kakav smartfone kaki bakraci sace si sejvam kino raspored za sutra pa da gledam na cesti. Laku noc

Brzina surfa je sasvim ok i mogu vam reć da opera fino prikazuje forum i da je stvar upotrebljiva na 2" displayu da čovjek ne diže dupe za kakvu sitnicu, kanta i tako radi uvijek zboh torrenta dakle nema zime.

[deadfall]

jel se dade na tom SE V640i software-ski ili nekim drugim putem jos malo pojacati zvuk na slusalicama od tvornickog ?

[F.E.A.R.]

jel se dade na tom SE V640i software-ski ili nekim drugim putem jos malo pojacati zvuk na slusalicama od tvornickog ?

Pa samo ubacis nove (jace) acoustic drivere

Probao sam spojiti mob na net prek adsl-a na kompu prema ovom postupku:
http://forums.se-nse.net/index.php?s...&mode=threaded

I nece jednostavno,javlja "Komunikacijska greska...bla bla"...sve sam uradio prema postupku,na kompu je sve ok,postavio sam ovaj network i sve je u najboljem redu,cak sam probao i diskonektati se s neta na kompu pa ga probat konektat preko moba i radi,kad udjem u browser na mobu na kompu se pojavi ono provjerava username i pass i spoji se....al na mobu nece,zna li ko zasto?!

EDIT: ispricavam se na double postu

Ponovno EDIT: U pitanju je bio firewall...radi sad,hvala svima

[deadfall]

Pa samo ubacis nove (jace) acoustic drivere

pa di ih ima za skinuti ?
kak se ubacuje ?

[ravilov]

Pogledaj temu o DB3150 moddanju. I koristi pretrazivanje.

[fukmondo]

Evo kao što rekoh sad i iz prve ruke radi s karticama od 8 gb napunio sam je skroz 20 mb je ostalo slobodno nikakve razlike u radu u odnosu na 4 gb koju sam imao do sada.

Informacije radi sony m2 max piše oko 4200 mb/s čitanje 10.800 mb/s 4 gb, apacer (zapravo san disk) 8gb oko 3.300 čitanje 12.800 mb/s. Znači apacer je bolji na čitanju, lošiji na pisanju u usporedbi sa sony karticom, pravde radi sony je duplo manja. Ovo preko čitača kartica, u radu s telefonom nikakve razlike nema.