spajanje mpx220 s kompom

[zvijerka]

aj recite vi meni lijepo kako spojit mpx220 s kompom ako se nema kabela nego ili preko bt-a ili preko irde. meni to nikako da uspije!! ništa ne mogu instalirat na mob jer ga ne mogu spojit. aj pomozite!

edit: preko irde sam uspio al mi je to malo nespretno, kako to npravit preko bt-a. activesync ga nikako ne prepoznaje preko bt-a

[phill]

ja sam probao al nejde, treba mu odrediti com port u activesyncu al nikako da to uspijem napraviti. procitao microsoft activesync help i nejde. odustao sam, ak neko skuzi nek opise postupak

[takozvani]

Use a Bluetooth connection to quickly create a direct connection between your mobile device and desktop computer. This method can be an advantage when switching between multiple devices because there are no cables or adapters to change.

Important Note For additional security, disable network bridging on the PC (specifically, bridging to a Remote NDIS adapter) before connecting to the PC to pass though to the Internet or a network. For more information on network bridging, see Windows Help on the PC.

You can follow these steps on the PC only if you are running Windows XP Service Pack 2 or later. Otherwise, you must use separately obtained Bluetooth software drivers, and use the instructions that come with that software to set up Bluetooth connections.

To set up a Bluetooth connection, do the following:

Step 1 Set up a Bluetooth COM port:
- Open the Bluetooth Devices Control Panel.
- On the Options tab, select Turn discovery on and Allow Bluetooth devices to connect to this computer.
- On the COM Ports tab, click Add.
- Select Incoming (device initiates the connection) and click OK.
- Note the number of the COM port that was added. The COM port number must be no higher than 20.
- Click OK to close the Bluetooth Devices Control Panel.

Step 2 Set up ActiveSync to use the Bluetooth COM port:
- In ActiveSync on the PC, on the File menu, click Connection Settings.
- Select Allow connections to one of the following.
- Choose the COM Port with the number you noted in Step 1 Set up a Bluetooth COM port.
- Click OK.

Step 3 Start Bluetooth sync from your device:
- In ActiveSync on the device, tap Menu, then tap Connect via Bluetooth.

Note: Media (music and videos) can be synchronized only by using a cable or cradle connection.

[zvijerka]

- Select Allow connections to one of the following.

ali ja nemam toga u active syncu. imam verziju 3.8 i to mi nigdje ne piše. il sam ja glup ili nešto ne štima.

[phill]

ja sam na active sync 4.0 probao i nejde, ovaj help nam ne pomaze kad nam fale opcije koje oni opisuju, takozvani ako si ti uspio objasni nam. negdje sam procitao da se bluetoohtom moze spojiti samo asian rom jer on ima mogucnost odabira serial com porta "settings/bluetooth/menu/com port" i u registryu treba promjeniti jednu opciju. probat cu navecer kad dojdem s posla.

[takozvani]

Ma moze se spojiti i s verzijom 3.8 i sa 4.0. Spajao sam se bez problema, samo što povezivanje preko bluetootha strašno brzo potroši bateriju. Sada trenutno nemam to podešeno jer sam preinstalirao komp.
Uglavnom najbitnije je dobro instalirati bluetooth na kompu, odnosno emulatore serial porta kojima se dodjeljuje broj com porta. Nakon toga se taj port odabere na ActiveSyncu.
Uglavnom na mobu ne treba ništa podešavati, niti aktivirati portove. To se sve samo napravi kod konekcije. Inače ja sam se spajao s ROM verzijom 1.150 (znači starijom) bez problema.
Ajoj, gore sam dao postupak iz helpa, a u biti sam mislio na ovo što slijedi. Po ovome sam ja radio:

Before you start remove all the pairing on your phone and computer.
1. install Active sync
2. connect phone to USB cable and computer and let active Sync run once.
3. Disconect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important)
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4
6. turn on discovery on your computer.
7. On your Phone goto Bluetooth / devices / New and select your computer enter pin on phone and PC
8. Go to Active Sync on your phone and click "Connect via Bluetooth"

Note:
- the com port must be added before you discover the computer from you phone.
- you have to sync from the phone.... sync from the computer does not work.
- under advanced options in active sync on the phone.. you do not need to set it to bluetooth.. it can stay on usb.

[zvijerka]

uspio sam čovječe!!!!!!! išao sam redom kako gore piše i sad radi. hvala puno