evo copy/paste. nije mi se dalo prevoditi, ali nema neke mudrosti. Ja sam ovo isto isprobao na jednom c60 i stvar radi
Sve programe mozete naci na mojoj stranici.
Stuff Used: Siemens EEprom Tool 2.21 by Skylord
Many Maps from other phones (mc60, m55, s55, sl55)
A bit of immagination
How it works
If you open your c60's eeprom with Siemens EEprom Tool,
you'll see that Id 5275 and 5276 are called "Colour Scheme Block 1" and "Colour Scheme Block 2".
Well, if you open another phone's map the same blocks are used to store colur schemes...
Extract the original 5275 block and the same block from a m55 map. They are
very similar except for the colour name displayed: blue for C60 and copper for m55.
Overwrite this block and it will work!!
The only thing it's important to highlight is that other models like m55, mc60, s55 have the
four blocks for colourschemes, so if you extract the third, it's id is 5277 which is not
recognized in a c60, so you have to edit the eep file with your favourite hex editor and change
the 9th value(position 0x8h):
9B : id 5275
9C : id 5276
9D : id 5277
Poslao: 3aTmr evo copy/paste. nije mi se dalo prevoditi, ali nema neke mudrosti. Ja sam ovo isto isprobao na jednom c60 i stvar radi
Sve programe mozete naci na mojoj stranici.
Stuff Used: Siemens EEprom Tool 2.21 by Skylord
Many Maps from other phones (mc60, m55, s55, sl55)
A bit of immagination
How it works
If you open your c60's eeprom with Siemens EEprom Tool,
you'll see that Id 5275 and 5276 are called "Colour Scheme Block 1" and "Colour Scheme Block 2".
Well, if you open another phone's map the same blocks are used to store colur schemes...
Extract the original 5275 block and the same block from a m55 map. They are
very similar except for the colour name displayed: blue for C60 and copper for m55.
Overwrite this block and it will work!!
The only thing it's important to highlight is that other models like m55, mc60, s55 have the
four blocks for colourschemes, so if you extract the third, it's id is 5277 which is not
recognized in a c60, so you have to edit the eep file with your favourite hex editor and change
the 9th value(position 0x8h):
9B : id 5275
9C : id 5276
9D : id 5277
daj ja stvarno ne kuzim i daj mi link od tvoje stranice jer sam ja tu pocetnik na ovom forumu
meni radi download za eeprom, a link za map je bio kriv, sad je ok
nema mape klasicne kao kod x55 serije. nego zamijenis postojece sheme boja u eepromu sa novim...
dali bi mogao malo detaljnije opisati kako to treba uciniti.sto trebam i gdje se na tvojoj stranici nalazi pod download ili...
necu da nesto pokvarim jer ce mi na servisu opet popravljati 1 mjesec a meni treba mob.
daj opisi postupak na hrvatskom a onda cu se tek baciti na posao
ne mogu ti detaljnije opisati nego sto jesam. Evo mislim da je Dark uspio iz prve...
Cuj, ne mogu ti ja garantirati da nesto neces zeznuti. Uvijek postoji ta mogucnost, mada je postupak jako jednostavan.
Download ti je pod Download/eeprom - za skylord eeprom...
i pod Download/map files - za map datoteke
Dakle trebas sa Eeprom tool-om iscitati eeprom sa tvog moba, tocnije, samo one blokove koje sam navea i u njima zamijenis originalni dio sa nekim drugim, npr. sa M55. Onda spremis te blokove (ali samo te blokove, ne cijeli eeprom) i vratis ih u mob. Onda bi trebao imati drugaciju shemu boja...
Pazi, ako se odlucis nesto dirati, sve to radis na svoju odgovornost, ja NE odgovaram za bilo kakve moguce nastale kvarove, zato vidi, prouci i odluci hoces li sto dirati ili ne...
Odgovori uz citat
Pravila postanja
Bookmarks