.
.
JUNCTION VIEW (JCV FILE)
Junction view is the “advanced” lane assistant, you will not see only the white arrow that indicate your exit or turn lane but a “real” indication of the lane. JCV files can be used only in supported devices, check your device spec if your device is supported or not before you try to update this feature.
In the map thread will find different type of JCV because this update file can be different in different devices, but sometime you can use different version of JCV files in the same model, usually they difference by the screen resolution.
To update this feature you have to copy new files in:
Device:\.System\JCV folder - for new devices with hidden .System folder
Device:\Garmin\JCV folder - for older device with JCV support
SD:\Garmin\JCV folder - this way for all devices
PhotoReal Junction view
With PhotoReal JCV will have more than a lane indication, will see a picture of what you really have behind you, buildings, bridges, trees…
This JCV file is only supported in few models, consult your device spec for info.
To update can use the same folders as normal JCV files before.
3D Buildings
This feature will apply to the map a 3D view with picture of famous buildings and a structure of the other buildings. Mostly available for the biggest cities.
This feature can be used updating the gmap3d.img file, this is the structure:
New devices with hidden .System folder
Device:\.System\gmap3d.img file
SD:\Map\gmap3d.img file
Other devices
Device:\Garmin\gmap3d.img file
SD:\Garmin\gmap3d.img file
You can use 2 different 3D buildings file at the same time, one gmap3d.img and the second one named gmap3d1.img, if the 2 diferent 3D files are stored in different folder you can use with the same name without problem.
EXP
Device:\.System\gmap3d.img (Europe 3D)
SD Card:\Map\gmap3d.img (America 3D)
Time Zone (gmaptz.img file)
This little map file will update the time setting on your device any time you move from one Timezone to another,
To update this feature have to replace old gmaptz.img with the new one, in this folder:
New Devices:\.System\gmaptz.img
Old Devices:\Garmin\gmaptz.img
NüRoute Technology: TrafficTrends & MyTrends
TrafficTrend improves the route calculating based historical traffic info like the day, time and traffic flow of a specific road.
MyTrends take care of the favorite and most used destination and even without sett the route will recognize it and will give you info like traffic flow and arrival time.
Your device must have a traffic receiver and be compatible with Trend features.
TrafficTrends and MyTrends
update files are XXXX.DB and XXXX.G2S copy this files in:
Device:\.System\G2S Folder - For G2S file
Device:\.System\SQlite Folder - For DB file
VOICE COMMAND - ASR Folder
In this folder will find the files that enable the Voice Command on your device. Not all the models have this feature, so if the your device don’t support it you don’t have to do this update.
ASR files are different for different Map versions, if you update the map you have to update the ASR files too. Different version of maps - EXP. CN Europe NT and CN Europe NTU have 2 different Set of files and have to use the right one to have Voice Command enable.
These files are XXXX.ASR and XXXX.SRX, delete all previous ASR and SRX files and copy the new one, you can have more than one version of Voice Command files in ASR folder, EXP. Can have European ASR and American ASR in the same time.
Important: You don’t have to rename these files, just use like they are.
To update this feature copy ASR+SRX files in
Device:\.System\ASR Folder - for NEW models with hidden .System folder.
Device:\Garmin\ASR Folder - for the other models with no hidden .System folder
thanks @Amar for This tutorial .
Hvala @tomojure
Odgovori uz citat
Bookmarks