Some Handy Tips.
------------------------------------------------------------------------ --------

Tips / undocumented functions:

- At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9

- A shortcut on the left menukey in standby-mode will take more time to open than a shortcut on the right menukey.

Reason: The left key is also used for the keylock so it shortly waits for pressing the * button.

- While writing text press and hold "#" to switch between Alpha mode and Number mode. You can also press a key

long to insert its number.

- In standby-mode, press and hold 0 to launch your wap home page.

- If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's

dark without having to unlock the keypad.

- To keep the backlight on, run Torch (freeware), press and hold the Menu button and go somewhere else on the

phone.

- To check your current firmware version simply type *#0000# in standby screen.

- To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen.

- To check your Bluetooth device address type *#2820# in standby screen.

- Start up in Safe Mode (no 'auto start' apps will be running): Hold down the pencil key when you turn on the phone

and hold it on until you have to enter your PIN code.

- Format the phone memory by typing *#7370# in standby screen.

- In standby mode,
45# + <talk> dials the number on your sim in memory slot 45.
50# + <talk> dials slot 50 and so on.




------------------------------------------------------------------------ --------
Regarding Log Times.
------------------------------------------------------------------------ --------

Found on another forum:

Quote:
When I set the GMT offset time in clock of 6600 to +530 then all my call log shows half hour prior to the actual time

logged, and if it is -530 then log shows after half hour of actual time and if the same is set at +500 or -500 then the

call log shows correct time of the call logged. But further I am not able to set the offset to + or - 500 as Psiloc world

clock pro changes the timing to exactly +530 indian timing. Does anyone has a solution?

The log timings depends on the time set in your mobile clock. If you change the timing and make a call the log shows

the changed time only. My previous post meant if th clock offset minutes is "00" and any hour, then log timings is

accurate to the time set on clock. But opening World clock pro changes it automatically to +530 as the home location

is india. and as the minutes offset changes to "30" the log time varies. If I dont use World clock pro nothing changes.



------------------------------------------------------------------------ --------
Operator Logos Explained.
------------------------------------------------------------------------ --------

The operator logo is the picture on top of your phone screen, in most cases is the name of your operator.

How to change it for a nice picture? You can do this by diferent ways:

First create this folder if you dont have it:

C:\System\Apps\Phone\Oplogo\

The operator logo will be stored on it...)

You can use FExplorer (any jpeg/bmp, no resize), seleQ (any image, it will resize it) --> select the image you want be

operator logo, select options-file-set as operator logo.

You can make your own logo:

The operator logos have the following format:

COUNTRYCODE_NETWORKCODE_SUBNETCODE.BMP

For example, for Spain:

Amena: 214 03 -> 214_3_0.BMP
Movistar: 214 07 -> 214_7_0.BMP
Vodafone: 214 01 -> 214_1_0.BMP

In the PHILIPPINES:
Smart: 515 01
Globe: 515 02

The size for bmp is 97 x 25 pixels.

Also, you can store diferent logos for diferent operators. For example if you change your SIM to other operator, you

will see the other logo, or if you travel to other countries, you can store diferent logos for the operators in this

countries.

You have a list of country codes and network codes here , just ignore the first "0" in network code if any.

If you want to delete the logo to restore the original (name of the operator) just delete the bmp file from

c:\system\apps\phone\oplogo.