izvinjavam se sto nisam barem ni hvala rekao,ali nisam ni bio u mogucnosti...privatni problemi...

al ev barem da vam javim dokle sam stigao i u cemu je sad problem.
isao sam po ovim postupcima:
Removing RSA:

1. Connect phone in bootloader mode again using the *+# + "power on";

2. Click "write backup" and select K1__BOOTCORE_TP.bkp;

3. Wait until the app do it's job. After it finishes, your phone gets BLACK SCREEN, this is OK;

4. Close the program and remove the battery and then insert in the phone again;

5. Turn on the phone using the red button;

6. Run RAMLdr2;

7. Click "send loader" and wait for the "ready" message;

8. Click "write boot" and select the Boot_0AC0_patch.bin;

9. Wait. The phone will be automatically shut off;

10. Close RAMLdr2 and run FB3;

11. Download a RSA removed reflash and flash it;

12. Close FB3 and open RAMLdr2;

13. Remove the battery and put it again. Wait until the program recognize the phone;

14. Click "send loader" and wait the "ready" message;

15. Click "write boot" and select Boot_Start_SW.bin;

16. DONE!!! Turn on the phone and do whatever you want with your CG1! RSA is gone!!

no medjutim kad dodjem do 11. tacke kad trebam flashati sa noRSA MP-om,sa kojim god sam pokusao nece.
kad pokrenem u fb3 dodje ono sending cgi1 i stane i samo vrijeme broji i nista se ne desava.
znali iko gdje grijesim,hvala unaprijed!