Unlocking with FAR CID 49

[S.Silva]

Evo ga našo sam vam kako možete sa FAROM pristupiti svom cid 49 telefonu,konačno je tu!
Podržani i brown mobiteli!
evo ako se nekom da može i prevesti na hrv ili staviti ovdje sve copy/paste jer se meni žuri van!


http://www.esato.com/board/viewtopic.php?topic=138615


Preuzeto sa esato foruma!

[Ico]

Evo c/p sa esato.com:
On 2007-01-04 16:34:05, 3ricK wrote:
Well ... i´ll make here a tutorial explaining how to use FAR with phones that are CID 49 !!
This can only be done thanks to "den_po" , a member form SE-NSE forums who make it possible now!! It was a "tiny new year gift" !
http://forums.se-nse.net/index.php?showtopic=6571&st=0

Edit.:

- v3.3
use only with sefp v0.10.0.51 (http://sephone.nm.ru/tools/)
now with any erom
w550: breakin-loader from version 3.0


Programs and Files needed :
1ş PhoneXS 2.10 Alpha 5 ( or new PhoneXS ++) so we can flash a part of a firmware into our phones!
2ş Far Manager 1.70 + SEFP plugin
3ş db2010cid49_3_2.rar.zip or newer version db2010cid49_3_3.rar.zip, which has the files created by den_po that will allow us to use FAR !
Link and mirrors : (links from forums.se-nse must be registered)

http://www.uploading.com/files/6099H...2.rar.zip.html
(db2010cid49_3_2.rar , files for RED and only R2B001 EROM phones)

Mirror for db2010cid49_3_2.rar : http://www.uploads.sc/download.php?f...c3113c81e04e1f

http://forums.se-nse.net/index.php?a...e=post&id=3667
(db2010cid49brown.rar.zip , brown loaders for Brown phones)

Mirror for db2010cid49brown.rar.zip:
http://www.uploads.sc/download.php?f...824a0eadd1a7a4

http://forums.se-nse.net/index.php?a...e=post&id=3692
(db2010cid49_3_3.rar.zip , new version that comes with upadted SEFP plugin and supports all EROM´s )

Mirror for db2010cid49_3_3.rar.zip: http://www.uploads.sc/download.php?f...d8da006f5728d9

*Extract the file (db2010cid49_3_3.rar.zip) to a folder ! Inside it you will see 2 folders and 2 files and in this ! The folder SEFP must be copied to the SEFP folder in the FarManager170PluginsSEFP ! If windows ask to overwrite files, choose YES. Also you must EXECUTE the file "sefp0.10.0.51patch.exe " to apply patch so all Erom versions can work with FAR properly!

Verifications needed :
1ş Edit: All EROM´s now supported!
2ş USB Flash Drivers must Be installed!
3ş Edit: Brown phones now supported with their loaders!!

So let´s Start!

Open PhoneXS 2.10 Alpha 5, select your Cable and Press Start! With your phone shut down , connect it to your PC holding de C button! Wait for PhoneXS to recognise it!





Now you must remember where you´ve extracted the file from den_po!!
Select Flash Main Firmware in the PhoneXs and point it to the folder you extracted the files! Select then the file that corresponds to your phone , in my case (K750i) k750w800_r2e_dcu.49r.ssw !
Then Press Flash !



The flash will start and should take less than a minute!
It will then appear Finishing Flash , after 30 seconds you can Press Stop (this from what a i read is kind of a bug from phoneXs ,it finalizes the flash but keeps on the finishing flash line) , press YES to confirm and then Close to shut down PhoneXS !



Now unplug your phone, remove battery and after 30 seconds put it again!

PS.: After you have flashed wit the ssw file YOU MUST NOT TURN ON THE PHONE! IT won´t WORK!! You can only turn it on again after flashing back the normal firmware which is explained in the end of this tuto!

Let´s Open now Far Manager!
Press ALT+F1 and Select SEFP !



Select the cable , maximum Speed and the script which represents your phone and press Enter The Matrix ! After That you will have FS and FLASH , just press FS and you should be able to access it just like you can on CID 36 phones !



After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!

Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .



And will be like this:



On the right side of FAR navigate to that folder you´ve previously extracted ! Enter in the REST folder and you shall see this:



Those are Firmware files that you must flash so you can you make your phone work again!!
You must flash the one which represents your current Firmware ( in my case R1DB001 ) ! You will only flash one file !
After selected the file you´ll flash Press F5 to copy it to the phone!



Press Copy again to Confirm !
Now this will appear :



Just let it in the way it appears , only make sure FLASH BABE ssw image is selected and then press FLASH !
A Warning Pop up will appear :



Just press YES to Confirm and a few seconds later you will see this :



Presse Close , quit Far , unplug phone , unplug battery and after 20 seconds put it again !
Now Turn on Phone and Voila , you have now a modded CID 49 phone !!

Just to remind that it was only tested with K750i sucessfully by now!!
By doing this tuto i sucessfully changed stuff by the third time on my K750i!

Ps.: You Must do this PROCESS every single Time you want to change Stuff on your Cell!

Ako uhvatim vremena, prevedem, pa onda stavim prijevod...
EDIT. radim na prijevodu...

[kinggo]

Malo OT, ali ovo izgleda malo komplicirano. Cini mi se da ima previse mogucnosti da nesto podje krivo.

[Ico]

Evo Tutorial koji objašnjava kako koristiti FAR sa mobitelima koji su CID49!
Ovo možemo raditi samo zahvaljujući «den_po», članu foruma SE-NSE koji je to omogućio.
http://forums.se-nse.net/index.php?showtopic=6571&st=0

Edit.:

- v3.3
koristi samo sa sefp v.0.10.0.51 (http://sephone.nm.ru/tools/)
sa bilo kojim erom
w550: prekinuti-loader iz verzije 3.0



Potrebni programi i fajlovi:
1) PhoneXS 2.10 Alpha 5 (ili novi PhoneXS ++) tako da možemo flešati dio firmware-a u mobitel!
2) Far Manager 1.70 + SEFP plugin
3) db2010cid49_3_2.rar.zip ili novu verziju db2010cid49_3_3.rar.zip, (koja ima fajl kreiran od «den_po») koji će nam omogućiti da koristimo FAR!
Linkovi i mirror-i: (linkovi sa forums.se-nse , trebate se registrirati)
http://www.uploading.com/files/6099H...2.rar.zip.html
(db2010cid49_3_2.rar , fajlovi za RED i samo R2B001 EROM mobitele)

Mirror za db2010cid49_3_2.rar : http://www.uploads.sc/download.php?f...c3113c81e04e1f

http://forums.se-nse.net/index.php?a...e=post&id=3667
(db2010cid49brown.rar.zip , brown loaders za Brown mobitele)

Mirror za db2010cid49brown.rar.zip:
http://www.uploads.sc/download.php?f...824a0eadd1a7a4

http://forums.se-nse.net/index.php?a...e=post&id=3692
(db2010cid49_3_3.rar.zip , nova verzija koja dolazi sa update-anim SEFP plugin-om i podržava sve EROM-e )

Mirror za db2010cid49_3_3.rar.zip: http://www.uploads.sc/download.php?f...d8da006f5728d9

Ekstraktajte fajl (db2010cid49_3_3.rar.zip) u folder! Unutra će te vidjeti 2 foldera i 2 fajla unutra! Folder SEFP morate kopirati u folder SEFP u FarManager170PluginsSEFP! Ako vas Windowsi pitaju da overwrite-ate («prekopirate») fajlove, stisnite YES. Također treba izvršiti (EXECUTE-at) fajl "sefp0.10.0.51patch.exe" da primjeni patch tako da sve EROM verzije mogu normalno raditi sa FAR-om!

Potrebne provjere:
1) EDIT: svi EROM-i su podržani!
2) USB flash diveri moraju biti instalirani!
3) EDIT: BROWN mobiteli su podržani sa njihovim loader-om!

Počnimo!

Otovrite PhoneXS 2.10 Aplha 5, odaberite svoj «kabel» i pritisnite Start! Dok je mobitel izgašen, spojite ga sa vašim PC-om držeći tipku C! Pričekajte dok ga PhoneXS prepozna!





Sad se trebate sjetiti di ste ekstraktali fajl od «den_po»!
Izaberite: Flash Main Firmware u PhoneXS i «uputite» ga u folder di ste ekstraktali fajlove!
Onda izaberite fajl koji odgovara (paše) vašem mobitelu, u ovom slučaju (k750i) k750w800_r2e_dcu.49r.ssw!
Onda pritisnite: Flash!



Flešanje će početi i trebalo bi trajati manje od minute!
Onda će se pojaviti: Finishing Flash (završavanje flešanja), nakon 30 sekundi možete pritisnuti Stop (to je nekakv «bug» PhoneXS-a, on finalizira fleš ali zadrži finishing flash line), stisnite YES da potvrdite i onda Close da izgasite PhoneXS!



Sada iskopčajte vaš mobitel, izvadite bateriju i poslije 30 sekundi je stavite ponovo nazad!


PS: Nakon flešanja sa ssw fajlom NESMIJETE PALITI MOBITEL!! Neće raditi! Možete ga samo upaliti ponovo poslije flešanja sa normalnim firmware-om, što je objašnjeno na kraju!

Otvorimo FAR manager!
Pritisnite ALT+F1 i odaberite SEFP!



Izaberite «kabel», maksimalnu brzinu (maximum Speed) i «skriptu» koja predstavlja vaš mobitel i pritisnite Enter The Matrix! Poslije toga će te imati FS i FLASH, samo pritisnite FS i moći će te pristupiti kao da je na CID 36 mobitelu!



Nakon editiranja svega što želite, morate izgasiti CSFSLoader, samo stišćite .. dok vas ne pita da li želite izaći i sitinite YES!
Izgasite FAR i iskopčajte mobitel!

Opet otvorite FAR i ponovite postupak spajanja mobitela!
Sada stisnite na FLASH.



Biti će ovako:


Na desnoj strani FAR-a odtiđite do foldera koji ste prije ekstraktali! Uđite u folder REST i vidjet će to ovo:



To su firmware fajlovi koje morate flešat da bi vaš mobitel ponovo radio!
Morate flešati onaj koji predstavlja vaš trenuti firmware (u ovom slučaju R1DB001)!
Flešat će te samo jedan fajl!
Nakon odabira fajla koji će te flešati, pritisnite F5 da ga kopirate u mobitel!



Pritisnite ponovo Copy da potvrdite!
Onda će vam se pojaviti ovo:



Pustite to kako se pojavljuje, samo budite sigurni da ste izabrali FLASH BABE ssw image i pritisnite FLASH!
Upozoravajući pop-up će se pojaviti:



Stisnite YES da potvrdite i koju sekundu kasnije će te vidjeti ovo:



Onda stisine Close, ugasite FAR, iskopčajte mobitel, izvadite bateriju i poslije 20 sekundi ju stavite ponovo nazad!
Sada upalite mobitel i imate modani CID 49 mobitel!

Jedna napomena: ovo je uspješno testirano jedino sa K750i do sad!
Do pisanja ovog tutoriala, uspješno su promjenje stvarni treći put na k750i.

PS: Ovaj "proces" morate ponavljati svaki put kada želite nešto promjeniti na svom mobitelu!

[dubrava]

ja bi pricekao da netko znatiželjniji ovo prvo isproba...sigurno ima takvih?

[S.Silva]

ništa od vanka uganuo sam nogu na treningu!

evo ovako to ti je još lakše nego flashati sa phone xs-om.

skineš far staviš mu one plugine i samo preflashas firmware sa onim fajlom da bi mogo ga far očitati.Spojiš ga sa farom i customiziraš si cijeli mob od menua pa do drivera od kamere u nekoliko min. nema više zahebancije sa phone xs i stalnog flashanja main firmwarea.Kad si gotov samo preflashas onaj file drugi kao da zaključaš vrata od sobe kad si ju pospremio!

Kad ga konektiraš sa mobom sve ideš po onoj proceduri od cid 36 mobova!
http://cafe.mobil.hr/showthread.php?...hlight=hacking

E da i ovi koji imaju customisatio fileove na memory sticku sada samo ga presele preko fara u svoj folder i riješe se onog na sticku!:bunny:

[vorker]

Pustite to kako se pojavljuje, samo budite sigurni da ste izabrali FLASH BABE ssw image i pritisnite FLASH!
Upozoravajući pop-up će se pojaviti:



Stisnite YES da potvrdite i koju sekundu kasnije će te vidjeti ovo:



Onda stisine Close, ugasite FAR, iskopčajte mobitel, izvadite bateriju i poslije 20 sekundi ju stavite ponovo nazad!
Sada upalite mobitel i imate modani CID 49 mobitel!




meni kad ga otvorim nema ono memory u flashu prazno bude i neznam sta da radim s tim
jel moze neko detaljno opisat kak se to radi i sta sve treba radit i treba li onaj phone xs
u njemu sam flashirao datoteke i imam ono rest i ssfp il kak vec i nemogu kopirat stavim kopirat ali nepokazuje nis ono sto pise

[blizzard]

Pustite to kako se pojavljuje, samo budite sigurni da ste izabrali FLASH BABE ssw image i pritisnite FLASH!
Upozoravajući pop-up će se pojaviti:



Stisnite YES da potvrdite i koju sekundu kasnije će te vidjeti ovo:



Onda stisine Close, ugasite FAR, iskopčajte mobitel, izvadite bateriju i poslije 20 sekundi ju stavite ponovo nazad!
Sada upalite mobitel i imate modani CID 49 mobitel!




meni kad ga otvorim nema ono memory u flashu prazno bude i neznam sta da radim s tim
jel moze neko detaljno opisat kak se to radi i sta sve treba radit i treba li onaj phone xs
u njemu sam flashirao datoteke i imam ono rest i ssfp il kak vec i nemogu kopirat stavim kopirat ali nepokazuje nis ono sto pise

neznam zasto ti nema memory.......... koji mob imas koji cid i koji color??

[cat330]

Evo Tutorial koji objašnjava kako koristiti FAR sa mobitelima koji su CID49!
Ovo možemo raditi samo zahvaljujući «den_po», članu foruma SE-NSE koji je to omogućio.

Možda mi možeš pomoći vezano za navedene upute o Unlocking with FAR CID 49 nakon postupka K750 se ne želi upaliti!

[Most Wanted]

Možda mi možeš pomoći vezano za navedene upute o Unlocking with FAR CID 49 nakon postupka K750 se ne želi upaliti!

kad zavrsis u faru,onda sa xs++ moras vratit main od k750( onaj .ssw main omogucava faru da otvori FS cid49 mobitela ali mobiteli ne mogu radti s tim main-om)

[darac_os]

Evo Tutorial koji objašnjava kako koristiti FAR sa mobitelima koji su CID49!
Ovo možemo raditi samo zahvaljujući «den_po», članu foruma SE-NSE koji je to omogućio.

E ja tu trebam malu pomoć!
Radim sa d750 brown i jel može to sa xs++3.1?
I ak bi mogli ovi linkovi za SEFP novi?
EDIT:
Ajd ak bi mi sam neko reko koji file da odaberem iz ovog foldera (db2010cid49brown.rar.zip) za flash u xs++-u?

[darac_os]

Ajd jel moze neko uploudat ovo sefp0.10.0.51 treba mi da mogu patchat CID49...jer JDflasher mi nes nece onaj rest napravit kak trreba jbg neznam....

[marianu]

[QUOTE=Ico;481584]Evo c/p sa esato.com:
On 2007-01-04 16:34:05, 3ricK wrote:
Well ... i´ll make here a tutorial explaining how to use FAR with phones that are CID 49 !!
This can only be done thanks to "den_po" , a member form SE-NSE forums who make it possible now!! It was a "tiny new year gift" !
http://forums.se-nse.net/index.php?showtopic=6571&st=0

Edit.:

- v3.3
use only with sefp v0.10.0.51 (http://sephone.nm.ru/tools/)
now with any erom
w550: breakin-loader from version 3.0


Programs and Files needed :
1ş PhoneXS 2.10 Alpha 5 ( or new PhoneXS ++) so we can flash a part of a firmware into our phones!
2ş Far Manager 1.70 + SEFP plugin
3ş db2010cid49_3_2.rar.zip or newer version db2010cid49_3_3.rar.zip, which has the files created by den_po that will allow us to use FAR !
Link and mirrors : (links from forums.se-nse must be registered)

http://www.uploading.com/files/6099H...2.rar.zip.html
(db2010cid49_3_2.rar , files for RED and only R2B001 EROM phones)

Mirror for db2010cid49_3_2.rar : http://www.uploads.sc/download.php?f...c3113c81e04e1f

http://forums.se-nse.net/index.php?a...e=post&id=3667
(db2010cid49brown.rar.zip , brown loaders for Brown phones)

Mirror for db2010cid49brown.rar.zip:
http://www.uploads.sc/download.php?f...824a0eadd1a7a4

http://forums.se-nse.net/index.php?a...e=post&id=3692
(db2010cid49_3_3.rar.zip , new version that comes with upadted SEFP plugin and supports all EROM´s )

Mirror for db2010cid49_3_3.rar.zip: http://www.uploads.sc/download.php?f...d8da006f5728d9

*Extract the file (db2010cid49_3_3.rar.zip) to a folder ! Inside it you will see 2 folders and 2 files and in this ! The folder SEFP must be copied to the SEFP folder in the FarManager170PluginsSEFP ! If windows ask to overwrite files, choose YES. Also you must EXECUTE the file "sefp0.10.0.51patch.exe " to apply patch so all Erom versions can work with FAR properly!

Verifications needed :
1ş Edit: All EROM´s now supported!
2ş USB Flash Drivers must Be installed!
3ş Edit: Brown phones now supported with their loaders!!

So let´s Start!

Open PhoneXS 2.10 Alpha 5, select your Cable and Press Start! With your phone shut down , connect it to your PC holding de C button! Wait for PhoneXS to recognise it!





Now you must remember where you´ve extracted the file from den_po!!
Select Flash Main Firmware in the PhoneXs and point it to the folder you extracted the files! Select then the file that corresponds to your phone , in my case (K750i) k750w800_r2e_dcu.49r.ssw !
Then Press Flash !



The flash will start and should take less than a minute!
It will then appear Finishing Flash , after 30 seconds you can Press Stop (this from what a i read is kind of a bug from phoneXs ,it finalizes the flash but keeps on the finishing flash line) , press YES to confirm and then Close to shut down PhoneXS !



Now unplug your phone, remove battery and after 30 seconds put it again!

PS.: After you have flashed wit the ssw file YOU MUST NOT TURN ON THE PHONE! IT won´t WORK!! You can only turn it on again after flashing back the normal firmware which is explained in the end of this tuto!

Let´s Open now Far Manager!
Press ALT+F1 and Select SEFP !



Select the cable , maximum Speed and the script which represents your phone and press Enter The Matrix ! After That you will have FS and FLASH , just press FS and you should be able to access it just like you can on CID 36 phones !



After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!

Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .



And will be like this:



On the right side of FAR navigate to that folder you´ve previously extracted ! Enter in the REST folder and you shall see this:



Those are Firmware files that you must flash so you can you make your phone work again!!
You must flash the one which represents your current Firmware ( in my case R1DB001 ) ! You will only flash one file !
After selected the file you´ll flash Press F5 to copy it to the phone!



Press Copy again to Confirm !
Now this will appear :



Just let it in the way it appears , only make sure FLASH BABE ssw image is selected and then press FLASH !
A Warning Pop up will appear :



Just press YES to Confirm and a few seconds later you will see this :



Presse Close , quit Far , unplug phone , unplug battery and after 20 seconds put it again !
Now Turn on Phone and Voila , you have now a modded CID 49 phone !!

Just to remind that it was only tested with K750i sucessfully by now!!
By doing this tuto i sucessfully changed stuff by the third time on my K750i!

Ps.: You Must do this PROCESS every single Time you want to change Stuff on your Cell!

Ako uhvatim vremena, prevedem, pa onda stavim prijevod...
EDIT. radim na prijevodu...

[MadMatax]

Jedno pitanje...to se isto ne mora ništa plaćati?

[Ico]

Koliko sam ja skužio to je đabe...

[S.Silva]

misliš da bi ja nešto uploadao što se plaća?

E da zahvaljuem ici,icu,ici... malo me i padeži sada hebu na prevedenom i napravljenom postu na hrvatskom jeziku!

[imaticx]

u zadnje vrijeme nisam bas pratio flashanje i phone xs. A i nemam bas razloga jel ne zelim nista prckati na K800 zbog joysticka i garancije. Zanima me samo kako da pristupim fileovima na telefonu, moram nesto provjeriti. Znam raditi sa FAR managerom. Da li je moguce pristupiti K800 fileovima s njim?

[S.Silva]

a što biš provijerio,ako bilo što promjeniš sa farom a tu već moraš mijenjati izgubit ćeš ju.

[imaticx]

ne radi mi "activity" tipka. Vodi na net odmah, umjesto na activity meni. mozda se nesto s fileovima pomijesalo ili sto vec. ali samo me zanima da vidim jel ima to gdje. rekli su da je bug u t-mobile firmwareu i da ga predam na servis, ali neda mi se cekati 3 tjedna mob

[S.Silva]

koji je k800 cid?

[MadMatax]

Šteta štto ne može za K800i..

[imaticx]

cid 49
_____________

[S.Silva]

a neznam,tu ako hoćeš far za cid49 moraš prvo main preflashat a na kraju vratiš na staro ali neznam dali će ovi u em to skužiti,ja sam ovo sa w800i i sa k750i radio ne sa k8oo,pa nisam baš siguran,neznam radi kako hoćeš,si probo sa seusom novi soft staviti?

[imaticx]

a neznam,tu ako hoćeš far za cid49 moraš prvo main preflashat a na kraju vratiš na staro ali neznam dali će ovi u em to skužiti,ja sam ovo sa w800i i sa k750i radio ne sa k8oo,pa nisam baš siguran,neznam radi kako hoćeš,si probo sa seusom novi soft staviti?

da, mislio sam da ce novi firmware to rijesiti ali nije. Htio bih ga preflashati sa cistim firmwareom, ali joystick je tu

[S.Silva]

da to ti je pretpostavljan tek kupljen k800,a preostaje ti jedino na servis ako te to tako živcira!