Selections of the software


Model select. (in our case S ME 45)

--> READ off Flash attach and switch mobile phone --> red listener key

operate briefly at the mobile phone.

After the Flash was selected --> save file --> and names to give.

It makes certain that with Settings From on 000000 stands and for Size on 600000.

Your selected Flash must have a size of 6.291.456 bytes!

If that mobile phone a BA chip has must before the UNISiemens Patch

by www.GSM Dev.com to be used.

Over rauszufinden whether you a BA chip have simply times the EEPROM

pick out and look which in the box information one indicates.

If there which stands with type of chip of BA is it in it.

Here geht's further!


Bring in for the software (only for problems!)


Select model (times again S ME 45)

Mobile phone attach and switch --> open off file (your Fubu/Backup)

-- >Write Flash --> red listener key at the mobile phone briefly operate

and the Flash runs.



Error messages


1. University Siemens on 99% always stops,

then times the following makes:

Start, implementing, msconfig enter, ok press, afterwards autostart click.

All Haeckchen raus makes there and starts again!!

One can change HP over afterwards again.

Remove also times the printer cable.


2. University Siemens stops with "Scanning...."

Mobile phone must be switched off

Mobile phone must be attached to COM1

Noname data cable

(do not function to original Siemens data cable partly)

Red listener key press.


3. Error message file Acces Denied

The writing protection for all university University of files remove

(files mark/right mouse button/writing protection remove)


Importantly, all background programs close,

otherwise it does not function possibly.



University University of guidance 2002 by multi-find



b) SME45Tools by MikG

Adjust as the first under Configuration model , COM haven and Baud rate.

Under normal conditions one can leave the Baud rate on 115200.