Dečki,dali znate ima li koja stranica specijalizirana za S45?
Dečki,dali znate ima li koja stranica specijalizirana za S45?
He, who laughs last, laughs best. He who laughs at Chuck Norris … dies.
Teško da ćeš naći baš specijaliziranu stranicu. Većinu stranica na kojima se govori o S45 imaš u temi Korisni linkovi...
Nego jesi skužio kako modificirati kabel? I napiši kaj ti treba za S45, odnosno S45i, možda se i nađe.
In vino veritas !
Omnia mea mecum porto !
Alea iacta est !
Ah,trebalo bi mi sve.....
Iskopao sam neki stari laptop,neki Panasonic CF-25,čini mi se vojni.
Nego,dobar je.
Prijenos preko kabela na S45 je izvrstan.
Tak mi trebaju stvari da se malo zezam,da vidim kaj se može od njega napraviti.
Dali S45i ima Javu?
Baš i nisam skužio kak prepraviti.
Još ni nisam stigao kabel raskopati...
Tak ću to složiti kad nađem vremena...
He, who laughs last, laughs best. He who laughs at Chuck Norris … dies.
Koliko me sjećanje služi, tko zna sad di je S45i, taj mob nema Javu ali ima e-mail klijent. Nekih drugih bitnih razlika se ne sjećam, a ako griješim neka me netko ispravi.
Postoji za njega niz patcheva, među ostalima i grafički meni i još niz drugih. Teško je ovako po sjećanju sjetiti se svih detalja. Dok središ kabel, naći će se i stare stvari, a i ja ću se prisjetitipa onda možemo o detaljima.
A, za prepravku reci koji dio ti nije jasan, previše je teksta da ga kompletnog prevodim.
In vino veritas !
Omnia mea mecum porto !
Alea iacta est !
U slijedećih nekoliko postova biti će, na engleskom ( radi se o automatskom prijevodu, pa za nedoumice bolje pitati) opisan postupak pretvaranja S45 u S45i. Isti se postupak može primjeniti i za ME45. Tekst je preuzet sa
http://www.mobiletuning.de/modules.p...showpage&pid=8
Male upute: Poslije svakog posta pogledaj sliku na ovoj spomenutoj strancici jer su tekst i slika povezani.
Update from S/ME45 to S45i
Proceeding:
1. Akku crammed load!!! (always!!!)
2. Fubu provide (if somewhat inclined goes)
3. Akku crammed load (already again)
4. Directory, dates... secure
5. WinSwup update on S45i v04
6. S45i v4 Activator by AC ID & Cluni
Loosely geht's!
Who has already a S/ME45@S/ME45i, but with temperature problems
can enter here.
If inclined goes to something, mobile phone any longer to switch on does not leave itself
or otherwise any problems emerge, simply the Fubu rewind.
1. Akku crammed load
I think this point explain myself from
In no case omit!!!
2. Fubu provide
Here have their two possibilities:
A) University Siemens (with BA chips patchen before!)
b) SME45Tools (no Probs with the BAs)
A) University Siemens
Download: Download/Uni Siemens
Supports SLxx, C/S/ME45, C/S/M35, S40, A3x, A40 and C30.
A condition: Win 9x/ME/NT/2k/XP
Data cables at Com 1, please only Nonamekabel use,
otherwise it does not fold.
Usimload start.
In vino veritas !
Omnia mea mecum porto !
Alea iacta est !
Selections of the software
Model select. (in our case S ME 45)
--> READ off Flash attach and switch mobile phone --> red listener key
operate briefly at the mobile phone.
After the Flash was selected --> save file --> and names to give.
It makes certain that with Settings From on 000000 stands and for Size on 600000.
Your selected Flash must have a size of 6.291.456 bytes!
If that mobile phone a BA chip has must before the UNISiemens Patch
by www.GSM Dev.com to be used.
Over rauszufinden whether you a BA chip have simply times the EEPROM
pick out and look which in the box information one indicates.
If there which stands with type of chip of BA is it in it.
Here geht's further!
Bring in for the software (only for problems!)
Select model (times again S ME 45)
Mobile phone attach and switch --> open off file (your Fubu/Backup)
-- >Write Flash --> red listener key at the mobile phone briefly operate
and the Flash runs.
Error messages
1. University Siemens on 99% always stops,
then times the following makes:
Start, implementing, msconfig enter, ok press, afterwards autostart click.
All Haeckchen raus makes there and starts again!!
One can change HP over afterwards again.
Remove also times the printer cable.
2. University Siemens stops with "Scanning...."
Mobile phone must be switched off
Mobile phone must be attached to COM1
Noname data cable
(do not function to original Siemens data cable partly)
Red listener key press.
3. Error message file Acces Denied
The writing protection for all university University of files remove
(files mark/right mouse button/writing protection remove)
Importantly, all background programs close,
otherwise it does not function possibly.
University University of guidance 2002 by multi-find
b) SME45Tools by MikG
Adjust as the first under Configuration model , COM haven and Baud rate.
Under normal conditions one can leave the Baud rate on 115200.
In vino veritas !
Omnia mea mecum porto !
Alea iacta est !
Selections of the software:
Subsequently, under READ Flash ADDR. on 000000 and Size on 600000 leave.
Switch mobile phone off, click on READ from Flash, briefly the red listener key
press and wait to the Flash is komlett selected.
Click afterwards on Write ton of file and the Fubu store.
In any case ones check whether the file also EXACTLY 6MB, thus
6.291.456 bytes is large!!!
Here geht's further
Bring in for the software (only for problems):
In vino veritas !
Omnia mea mecum porto !
Alea iacta est !
Bookmarks