S45 vs S45i

[Ro@m]

Evo ovako:

Mene zanima kakva je uopče razlika između ova dva modela?
Je li softverska ili kakva.
Trebao bi mi neki stariji mob jer sam si kupio tomato i uzeo starov S55 dok se ne snađe.


Također imam problem kod S45.
Kad ga upalim sve je ok samo što nema slike na ekranu,što bi to moglo biti,dali se isplati to popravljati?

[RedkinG]

s45i ima Email dok ovaj ne i mislim da je razlika još da ovaj ima javu ali nisam siguran, što se tiče problema ja kod svog sl45 moram nekad malo pritisnuti ga da ekran dobije kontakt, pa onda još probaj napraviti ovaj postupak, dosta mi je mobova na ovaj način se proradio http://cafe.mobil.hr/showthread.php?t=26864

[Ro@m]

Iz ovog nisam ništa saznao....

[Ro@m]

Nema veze.
Nevjerovatno,problem se riješio...
Nećeš nikad pogoditi kaj kod siemensa pomaže.
Par puta sam vadio bateriju is S45,i par puta tapnuo po ekranu.
Stavim ja svoju tomato karticu unutra niša...
Vrnem nazad u S55,reko idem onako još jednom bezveze probati upaliti S45 ,možda bu kaj.
Kad ono radi sve je sa ekranom ok.
Zagasim ga,stavim tomato i molim Boga da radi...
Kad ono,radi!
Upravo ga punim!
Kako Siemens mobiteli znaju iznenaditi!
Zato ih volim!!

[Sljaka]

Između S45 i S45i postoji samo softverska razlika. Drugim riječima moguće je iz S45 napraviti S45i.
Trebala bi biti tema o tome na forum, a upute (na njemačkom) imaš i na www.gsm-free.org u dijelu Siemens, pa soft tuning i onda imaš link na S/ME45-S/ME45i.

[Ro@m]

Da,pročitao sam to.
Nego,imam orig kabal od S45.
Vidio sam da ne valja za promjenu.
Kaj treba na njemu modificirati?

[Sljaka]

Pogledaj kako preurediti kabel na www.sljaka.tk pod Trikovi i savjeti..

[Ro@m]

Dečki,dali znate ima li koja stranica specijalizirana za S45?

[Sljaka]

Teško da ćeš naći baš specijaliziranu stranicu. Većinu stranica na kojima se govori o S45 imaš u temi Korisni linkovi...

Nego jesi skužio kako modificirati kabel? I napiši kaj ti treba za S45, odnosno S45i, možda se i nađe .

[Ro@m]

Ah,trebalo bi mi sve.....
Iskopao sam neki stari laptop,neki Panasonic CF-25,čini mi se vojni.
Nego,dobar je.
Prijenos preko kabela na S45 je izvrstan.
Tak mi trebaju stvari da se malo zezam,da vidim kaj se može od njega napraviti.
Dali S45i ima Javu?
Baš i nisam skužio kak prepraviti.
Još ni nisam stigao kabel raskopati...
Tak ću to složiti kad nađem vremena...

[Sljaka]

Koliko me sjećanje služi, tko zna sad di je S45i , taj mob nema Javu ali ima e-mail klijent. Nekih drugih bitnih razlika se ne sjećam, a ako griješim neka me netko ispravi.
Postoji za njega niz patcheva, među ostalima i grafički meni i još niz drugih. Teško je ovako po sjećanju sjetiti se svih detalja. Dok središ kabel, naći će se i stare stvari, a i ja ću se prisjetiti pa onda možemo o detaljima.
A, za prepravku reci koji dio ti nije jasan, previše je teksta da ga kompletnog prevodim.

[Sljaka]

U slijedećih nekoliko postova biti će, na engleskom ( radi se o automatskom prijevodu, pa za nedoumice bolje pitati) opisan postupak pretvaranja S45 u S45i. Isti se postupak može primjeniti i za ME45. Tekst je preuzet sa
http://www.mobiletuning.de/modules.p...showpage&pid=8

Male upute: Poslije svakog posta pogledaj sliku na ovoj spomenutoj strancici jer su tekst i slika povezani.

Update from S/ME45 to S45i






Proceeding:

1. Akku crammed load!!! (always!!!)
2. Fubu provide (if somewhat inclined goes)
3. Akku crammed load (already again)
4. Directory, dates... secure
5. WinSwup update on S45i v04
6. S45i v4 Activator by AC ID & Cluni


Loosely geht's!

Who has already a S/ME45@S/ME45i, but with temperature problems

can enter here.

If inclined goes to something, mobile phone any longer to switch on does not leave itself

or otherwise any problems emerge, simply the Fubu rewind.



1. Akku crammed load

I think this point explain myself from

In no case omit!!!


2. Fubu provide

Here have their two possibilities:

A) University Siemens (with BA chips patchen before!)
b) SME45Tools (no Probs with the BAs)
A) University Siemens

Download: Download/Uni Siemens

Supports SLxx, C/S/ME45, C/S/M35, S40, A3x, A40 and C30.

A condition: Win 9x/ME/NT/2k/XP

Data cables at Com 1, please only Nonamekabel use,

otherwise it does not fold.



Usimload start.

[Sljaka]

Selections of the software


Model select. (in our case S ME 45)

--> READ off Flash attach and switch mobile phone --> red listener key

operate briefly at the mobile phone.

After the Flash was selected --> save file --> and names to give.

It makes certain that with Settings From on 000000 stands and for Size on 600000.

Your selected Flash must have a size of 6.291.456 bytes!

If that mobile phone a BA chip has must before the UNISiemens Patch

by www.GSM Dev.com to be used.

Over rauszufinden whether you a BA chip have simply times the EEPROM

pick out and look which in the box information one indicates.

If there which stands with type of chip of BA is it in it.

Here geht's further!


Bring in for the software (only for problems!)


Select model (times again S ME 45)

Mobile phone attach and switch --> open off file (your Fubu/Backup)

-- >Write Flash --> red listener key at the mobile phone briefly operate

and the Flash runs.



Error messages


1. University Siemens on 99% always stops,

then times the following makes:

Start, implementing, msconfig enter, ok press, afterwards autostart click.

All Haeckchen raus makes there and starts again!!

One can change HP over afterwards again.

Remove also times the printer cable.


2. University Siemens stops with "Scanning...."

Mobile phone must be switched off

Mobile phone must be attached to COM1

Noname data cable

(do not function to original Siemens data cable partly)

Red listener key press.


3. Error message file Acces Denied

The writing protection for all university University of files remove

(files mark/right mouse button/writing protection remove)


Importantly, all background programs close,

otherwise it does not function possibly.



University University of guidance 2002 by multi-find



b) SME45Tools by MikG

Adjust as the first under Configuration model , COM haven and Baud rate.

Under normal conditions one can leave the Baud rate on 115200.

[Sljaka]

Selections of the software:

Subsequently, under READ Flash ADDR. on 000000 and Size on 600000 leave.

Switch mobile phone off, click on READ from Flash, briefly the red listener key

press and wait to the Flash is komlett selected.

Click afterwards on Write ton of file and the Fubu store.

In any case ones check whether the file also EXACTLY 6MB, thus

6.291.456 bytes is large!!!

Here geht's further



Bring in for the software (only for problems):

[Sljaka]

Under Write Flash ADDR on 000000 and Size on 600000 leave open and

From file click to READ. Here the before stored bin File becomes

indicated.

Afterwards mobile phone off switch, on Write ton Flash click, briefly those

red listener key press and wait to the Fubu is completely geflasht.


3. Akku crammed load

Times again. Omit in no case!

4. Addresses, dates... secure

For the dates can take programs to it such as s25@once or Vissie.

For the directory its however RW Book needs (by AC ID):

Download here: RWBook


Setup:

In the register map Setup can be adjusted the program.

COM haven indicates the COM interface, on which the telephone hangs,

Config is the configuration of this COM Port's.

Car open RK startup opens the COMPort with activation automatic

with program start.

After a change the haven with ' open haven ' must again be opened.

For the Config e.g. valid values are 57600, n, 8, 1 or 19200, n, 8, 1

whereby the first number always the Baud rate, n=keine parity, 7

the data bits and 1 the Stopbit's is.


READ/Write Book

After click on "CoPy Book" opens file store under

Dialogue, there can be selected a file, in that the directory

one stores.

Similarly a directory knows again in's telephone with "write Book"

are stored.

With "extract VCards from mobile" can one each address individually

store in a file as vcf.

RW Book guidance © 2002 by AC ID [ mrp ]

5. WinSwup update on S45i v04

Download: Updates/S45i_0401010

After the start of S45i_040101.EXE you place only times under Serial Config

the Com haven and the Baud rate.

Set the checkmark with Skip with Pre and post office checks.

Mobile phone switch off, on start click, briefly the red listener key press

and wait to the update is finished.

Here see you right beside Erase Flash also again your type of chip.

6. S45i v4 Activator by AC ID & Cluni

Download: Activator

[Sljaka]

Reset COM haven and Baud rate as the first time.

Mobile phone switch off.

Afterwards on READ of patches click and briefly the red listener key press.

Now should on the left of your akuellen modification at your software

are indicated (red box; that is not with me everything grey there I S/ME

has)

The following Patches is recommended:

- 1st (carriage return character) --> activates

- 2nd (carriage return character) --> act fourth

- S45 Patch (old) --> deactivates

- ME45 Patch (old) --> deactivates

- S, me45 Patch --> activates

- Developer monitor --> optional (goes also over SIM map)

- open BFB mode --> optional (for example for the Sensortool one needs)

Simply the checkmarks set, and/or remove around the correct Patches

to de/aktivieren.

Afterwards on write patches click (I believe one needs the red

Listener key not)



In the end one should be mobile phone switch on and be pleased!

You tuned your mobile phone on own danger, for evtl. Damage none becomes

Adhesion taken over!!!


Guidance 2003 by b@iLLi

big thanks tons of ACiD[mrp ] and cluni for this tool
and ton skylord for developing the patches in flash

i na kraju još jednom ponavljam da u orginalnom tekstu su slike i postovi su prekidani upravo na mjestima gdje se nalaze te slike tako da je za potpuno razumijevanje potrebno se služiti i orginalnim tekstom.
Oni koji razumiju njemački, mogu se poslužiti i samo s orginalom

[Ro@m]

Eh,nisis trebao to ovdje postati,kužim ja njemački...

Nego,koliko koliki otpornici iduz na kabel?
2X15KOhm?
Ako da,ima li gdje kakva čipoteka u Karlovcu di bi ih mogao kupiti?

[Sljaka]

Nema veze. možda i nekom drugom zatreba. U Karlovcu više nemaš nigdje za kupit elektronički materijal. Eventualno bi se nešto moglo naći u Scartu na tržnici, ali mislim da optornike ne drže. Dućan koji je bio na starom placu je dva puta propao zbog premalog prometa.

[Ro@m]

Damn...
Niš,izgleda da ću morati fektati profesore u školi....
Prvo ću probati fektati lika iz digitalne elektronike...