SL45 flash patches (part 2)

[Lejzermaster]

Read New SMS While Key Locked

Firmware : SL45 v5601
Author : SL45_6688i
Release : May 18, 2003

Read new SMS by Left Soft Key while keypad locked. Keypad still locked after reading.

3B07C8: 46F81F00 FAC770D8
27D870: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 46F844002D0446F81F00FADBCC07FADB3C05

---------

Bas mi se i ne cini kao neki ispravno napisani patch.. pa valjda ni ne radi s VKlayom.
Ja ga nisam jos isprobao, pa ne znam..
Ako se da vama eksperimentirati.. eksperimentirajte pa javite

Ja mislim da bi trebao onda ici ovako:

3B07C8: 46 F8 1F 00 --> FA C7 70 D8
27D870: FF FF FF FF FF FF FF FF FF --> 46 F8 44 00 2D 04 46 F8
27D878: FF FF FF FF FF FF FF FF FF --> 1F 00 FA DB CC 07 FA DB
27D880: FF FF --> 3C 05

[3aTmr]

Ja sam ga isprobao i gasi mi se mobitel. Čak sam ga dvaput probao ubaciti, ali uvijek isti. Ako kome uspije nek se javi...
Inače, bio bi to koristan patch

[3aTmr]

Treća sreća je upalila, sad mi radi, dakle, kad mi je zaključana tipkovnica, a dođe mi sms poruka ne treba otključavati, već samo kliknem na left soft key i otvorim je. Zgodno..

[Lejzermaster]

U cemu je bila kvaka onda?
Si nesto krivo unosio ili?

[3aTmr]

Vjerojatno sam nešto krivo unia. Ovaj put sam radia sa unisiemens-om i sad mi radi i baš mi je to dobar patch.

[Lejzermaster]

Cek to znaci da onda ovo stima ne?
3B07C8: 46 F8 1F 00 --> FA C7 70 D8
27D870: FF FF FF FF FF FF FF FF FF --> 46 F8 44 00 2D 04 46 F8
27D878: FF FF FF FF FF FF FF FF FF --> 1F 00 FA DB CC 07 FA DB
27D880: FF FF --> 3C 05

----------------------------------

Isprobao sam... radi

[3aTmr]

nemam pojma, šta to nije isto?? Ja sam unia onakav kakav je tamo.

[coma_zgb]

jel se moze napraviti neki patch da kad citas poruku imas onaj klizac sa strane kada si u porukama, kao sto je to na s45?

[Lejzermaster]

Read New SMS, Missed Calls While Key Locked V02

Firmware : SL45 v5601
Author : SL45_6688i
Release : May 20, 2003

Read new SMS, Missed Calls and Mix of SMS, Missed Calls, Missed Alarm by pressing Left Soft Key while keypad locked.
Keypad still locked after reading.

3B07C8: 46F81F00 FAC770D8

27D870: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 46F844002D0A46F846002D0946F84C00
27D880: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 2D0846F81F00FADBCC07FADB3C05FADB
27D890: FFFFFFFFFFFF 0006FADB2406

Eto malo poboljsane verzije..

[Lejzermaster]

Poslao: coma_zgb
jel se moze napraviti neki patch da kad citas poruku imas onaj klizac sa strane kada si u porukama, kao sto je to na s45?

Mislim da je netko predao zahtjev vec za ovaj patch.
Mi se moramo strpiti i pricekati dok rizapn i drustvo nadju vremena pa naprave

[viki2win]

Poslao: Fabi
Read New SMS, Missed Calls While Key Locked V02

Firmware : SL45 v5601
Author : SL45_6688i
Release : May 20, 2003

Read new SMS, Missed Calls and Mix of SMS, Missed Calls, Missed Alarm by pressing Left Soft Key while keypad locked.
Keypad still locked after reading.

3B07C8: 46F81F00 FAC770D8

27D870: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 46F844002D0A46F846002D0946F84C00
27D880: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 2D0846F81F00FADBCC07FADB3C05FADB
27D890: FFFFFFFFFFFF 0006FADB2406

Eto malo poboljsane verzije..

Korisno sad sam ga ukucao

[Lejzermaster]

Bad je u tome kaj se ne upali svijetlo kad citas SMS sa zakljucanom tipkovnicom..
A vidim da mi se i ugasi mob kad imam Missed Call pa ga pogledam pa odem u normalni stand by telefona i stisnem crveno
Vidim da ima bugova. Za sad vracam na prethodnu verziju

[viki2win]

Ni u prvom se ne upali svijetlo kod čitanja. Rješenje je da prvo držiš stisnutu crvenu tipku da se upali svjetlo pa onda pročitaš sms.

[Lejzermaster]

Da.. onda ti je mozda lakse i otkljucat tipkovnicu

[Lejzermaster]

Digital Clock as An Operator Logo

Firmware : SL45v56
Author : RizaPN
Release : May 18, 2003

This patch will overwrite the "Animated Operator Logo" patch.
Undo that patch before applying this patch.

0x3AC464 : F2 F6 76 3F -> DA C7 44 D1

0x3B0362 : 46 FC 22 00 -> DA C7 30 D1
0x3B0E54 : DA F0 A2 D5 -> DA C7 20 D1
0x3B36C0 : DA E5 02 4B -> DA C7 50 D1

0x27D120 : FF FF FF FF FF FF FF FF -> DA F0 A2 D5 E0 16 D7 40
0x27D128 : FF FF FF FF FF FF FF FF -> 34 00 F7 FC 1B 3E DB 00
0x27D130 : FF FF FF FF FF FF FF FF -> 48 C1 FD 05 E0 04 D7 40
0x27D138 : FF FF FF FF FF FF FF FF -> 34 00 F7 F8 1B 3E 46 FC
0x27D140 : FF FF FF FF -> 22 00 DB 00
0x27D144 : FF FF FF FF FF FF -> F2 F6 76 3F 0D F5

0x27D150: FF FF FF FF FF FF FF FF -> D7 40 34 00 F3 F8 1B 3E
0x27D158: FF FF FF FF FF FF FF FF -> 2D 34 E0 0C E0 BE BB 27
0x27D160: FF FF FF FF FF FF FF FF -> E0 0C D7 50 0D 00 F2 F1
0x27D168: FF FF FF FF FF FF FF FF -> DE 25 F2 F2 DC 25 88 20
0x27D170: FF FF FF FF FF FF FF FF -> BB 11 E6 FE FF FF D7 40
0x27D178: FF FF FF FF FF FF FF FF -> 34 00 54 FE 1C 3E DD 03
0x27D180: FF FF FF FF FF FF FF FF -> 06 FC 0D 00 0D 04 E0 AE
0x27D188: FF FF FF FF FF FF FF FF -> BB 12 26 FC 09 00 98 10
0x27D190: FF FF FF FF FF FF FF FF -> BB 01 0D 17 E0 A2 F6 F1
0x27D198: FF FF FF FF FF FF FF FF -> 0E FE 5B 22 F2 F1 0C FE
0x27D1A0: FF FF FF FF FF FF FF FF -> 88 10 F2 FE 0E FE BB 03
0x27D1A8: FF FF FF FF FF FF FF FF -> 98 E0 BB 01 CB 00 88 C0
0x27D1B0: FF FF FF FF FF FF FF FF -> 06 FE 34 01 E0 8D DA C1
0x27D1B8: FF FF FF FF FF FF FF FF -> EC 22 98 C0 06 FC 16 00
0x27D1C0: FF FF FF FF FF FF FF FF -> CB 00 DA E5 02 4B DB 00

0x4BAE56 : 1E 07 01 00 AD 1F AC 03 -> 16 2F 01 00 20 23 AD 03
0x4BAE5E : 1E 07 01 00 C9 1F AC 03 -> 16 2F 01 00 B0 23 AD 03
0x4BAE66 : 1E 07 01 00 E5 1F AC 03 -> 16 2F 01 00 30 27 AD 03
0x4BAE6E : 1E 07 01 00 01 20 AC 03 -> 16 2F 01 00 C0 27 AD 03
0x4BAE76 : 1E 07 01 00 1D 20 AC 03 -> 16 2F 01 00 40 2B AD 03
0x4BAE7E : 1E 07 01 00 39 20 AC 03 -> 16 2F 01 00 D0 2B AD 03
0x4BAE86 : 1E 07 01 00 55 20 AC 03 -> 16 2F 01 00 50 2F AD 03
0x4BAE8E : 1E 07 01 00 71 20 AC 03 -> 16 2F 01 00 E0 2F AD 03
0x4BAE96 : 1E 07 01 00 8D 20 AC 03 -> 16 2F 01 00 60 33 AD 03
0x4BAE9E : 1E 07 01 00 A9 20 AC 03 -> 16 2F 01 00 F0 33 AD 03
0x4BAEA6 : 1E 07 01 00 C5 20 AC 03 -> 0D 2F 01 00 70 37 AD 03
0x4BAEAE : 1E 07 01 00 E1 20 AC 03 -> 65 2F 01 00 20 08 AE 03

This patch use firmware image no. 309 - 318 as a Digital Clock number (image size is 22x47), image no. 319 as a colon (image size is 13x47), and image no. 320 as a clock background. Modify those images using my ffmod or any other Siemens picture modifier.

Setting Options (Experience Users):
- Values 16 and 2F in the block address 0x4B is the digit size (22x47), modify them if you want to use another digit image size (also for colon size, 0D).
- Value 8D, address 0x27D1B5 is the top image position (= 8), and value 0C, address 0x27Da161 is the most left image position.
Modify it with another yD (maximum is FD) value if you want to change the y position, and xC (maximum is FC) for x position.
- Value 16, address 0x27D1BE is a digit width. Use your own value.
- Value 0D, address 0x27D182 is a colon width.
- Value 09, address 0x27D18C is a (digit width - colon width)

Next version will combine: Original Operator Logo, Animated Operator Logo images, and some settable Digital Clock (changeable through the Profile setting).

Digits example:



Download them from my zsoft_pub archive (no need to be a member), http://groups.yahoo.com/group/zsoft_pub/files ...

--------------------------------

Ovo mi se cini OK
Nego.. svi smo vidli onaj patch:
Using midlet for Screen Saver when Keylocked
Taj patch je OK samo mu je mana sto je dosta trosio bateriju..
Nadam se da ovaj nece toliko..

Ajd to ukucajte do navecer pa javite dal je OK.. da se ja ne zahebavam s ukucavanejm

[viki2win]

Poslao: Fabi
Da.. onda ti je mozda lakse i otkljucat tipkovnicu

E vidiš toga se nisam sjetio

[3aTmr]

evo isti patch ali u vkp obliku za one kojima se neda upisivati.
(znači samo ovo iskopirajte u v_klay)

;igital Clock as An Operator Logo
;
;Firmware : SL45v56
;Author : RizaPN
;Release : May 18, 2003
;
;This patch will overwrite the "Animated Operator Logo" patch.
;Undo that patch before applying this patch.
;
3AC464: F2F6763F DAC744D1
;
3B0362: 46FC2200 DAC730D1
3B0E54: DAF0A2D5 DAC720D1
3B36C0: DAE5024B DAC750D1
;
27D120: FFFFFFFFFFFFFFFF DAF0A2D5E016D740
27D128: FFFFFFFFFFFFFFFF 3400F7FC1B3EDB00
27D130: FFFFFFFFFFFFFFFF 48C1FD05E004D740
27D138: FFFFFFFFFFFFFFFF 3400F7F81B3E46FC
27D140: FFFFFFFF 2200DB00
27D144: FFFFFFFFFFFF F2F6763F0DF5
;
27D150: FFFFFFFFFFFFFFFF D7403400F3F81B3E
27D158: FFFFFFFFFFFFFFFF 2D34E00CE0BEBB27
27D160: FFFFFFFFFFFFFFFF E00CD7500D00F2F1
27D168: FFFFFFFFFFFFFFFF DE25F2F2DC258820
27D170: FFFFFFFFFFFFFFFF BB11E6FEFFFFD740
27D178: FFFFFFFFFFFFFFFF 340054FE1C3EDD03
27D180: FFFFFFFFFFFFFFFF 06FC0D000D04E0AE
27D188: FFFFFFFFFFFFFFFF BB1226FC09009810
27D190: FFFFFFFFFFFFFFFF BB010D17E0A2F6F1
27D198: FFFFFFFFFFFFFFFF 0EFE5B22F2F10CFE
27D1A0: FFFFFFFFFFFFFFFF 8810F2FE0EFEBB03
27D1A8: FFFFFFFFFFFFFFFF 98E0BB01CB0088C0
27D1B0: FFFFFFFFFFFFFFFF 06FE3401E08DDAC1
27D1B8: FFFFFFFFFFFFFFFF EC2298C006FC1600
27D1C0: FFFFFFFFFFFFFFFF CB00DAE5024BDB00
;
4BAE56: 1E070100AD1FAC03 162F01002023AD03
4BAE5E: 1E070100C91FAC03 162F0100B023AD03
4BAE66: 1E070100E51FAC03 162F01003027AD03
4BAE6E: 1E0701000120AC03 162F0100C027AD03
4BAE76: 1E0701001D20AC03 162F0100402BAD03
4BAE7E: 1E0701003920AC03 162F0100D02BAD03
4BAE86: 1E0701005520AC03 162F0100502FAD03
4BAE8E: 1E0701007120AC03 162F0100E02FAD03
4BAE96: 1E0701008D20AC03 162F01006033AD03
4BAE9E: 1E070100A920AC03 162F0100F033AD03
4BAEA6: 1E070100C520AC03 0D2F01007037AD03
4BAEAE: 1E070100E120AC03 652F01002008AE03
;
;This patch use firmware image no. 309 - 318 as a Digital Clock number (image size is 22x47), image no. 319 as a colon (image size is 13x47), and image no. 320 as a clock background. Modify those images using my ffmod or any other Siemens picture modifier.
;
;Setting Options (Experience Users):
;- Values 16 and 2F in the block address 0x4B is the digit size (22x47), modify them if you want to use another digit image size (also for colon size, 0D).
;- Value 8D, address 0x27D1B5 is the top image position (= 8), and value 0C, address 0x27Da161 is the most left image position.
;Modify it with another yD (maximum is FD) value if you want to change the y position, and xC (maximum is FC) for x position.
;- Value 16, address 0x27D1BE is a digit width. Use your own value.
;- Value 0D, address 0x27D182 is a colon width.
;- Value 09, address 0x27D18C is a (digit width - colon width)

[Lejzermaster]

@ 3aTmr

Daj reci.. jesi ga isprobao?

[3aTmr]

Ubacio sam ga i onda se nešto dešava na ekranu, bez veze, ali to je bez slika. Kad sam ubacia slike onda mi se gasi mob, pa sam to skinia, jer ne treba mi taj patch, a nije mi se više dalo zezati s tim.

[Lejzermaster]

Ne znam.. meni se jako svidjao onaj patch koji je prikazivao sat.
Samo velim.. problem mi je bila baterija..
Mislim da potorsnja baterije kod ovog patca nebi trebala biti velika.. jer se ne povlaci kao java midlet.

[viki2win]

Ja sam sad isprobao i na ekranu su mi neki hieroglifi. Sve je prošarano? Možda sam krivo učitao *.BMP-ove. Treba li zamjeniti slike 309 - 320? i kojim redosljedom? Na koje mjesto dođe dvotočka?

[Lejzermaster]

Poslao: viki2win
Treba li zamjeniti slike 309 - 320? i kojim redosljedom? Na koje mjesto dođe dvotočka?

Pogledaj jel imas ukljuceno:
SETUP --> DEVICE --> CLOCK --> AUTO DISPLAY
Probaj to iskljucit (ako imas ukljuceno) pa javi..

copy/paste:

This patch use firmware image no. 309 - 318 as a Digital Clock number (image size is 22x47), image no. 319 as a colon (image size is 13x47), and image no. 320 as a clock background. Modify those images using my ffmod or any other Siemens picture modifier.

309-318 --> stavis brojeve
319 --> stavis dvotocku
320 --> stavis background

E sad.. to bi trebalo biti to..

Jesi tako stavio ili?

[3aTmr]

Evo ja sam sad ponovo probao, ali ovaj put sa hex editorom, ffmod, pa unisiemens-om i opet ista stvar, samo mi se hijeroglifi pojavljuju na diaplay-u
Ništa od onih zgodnih brojeva...

[Lejzermaster]

Evo ja sam sad sve rucno ukucavao.. i prikazao mi se sat na dvije sekunde i telefon se ugasio.
Ali vidio sam ga
Svaki put kad sad upalim mob.. vidim ga na dvije sekunde
Idem sad pogledat da nisam negdje nesto krivo ukucao..

-------------
22:01

Hmm da.. ukucao sam jedan krivi kod.. ali opet nista

Sad dobijem sad na kojih 5 sec.. ali mi vise opet ne radi ni jedna tipka i telefon se opet sam ugasi
U svakom slucaju svidja mi se taj sat

Ne zna vise kaj bi probao..
Mora daje RizaPN nesto pogrijesio

[3aTmr]

Neznam, meni uvijek isto, mob mi se ne gasi, ali nema sata, nego samo dvotočka i oko nje neke smetnje. Ali kako sam već rekao, nije mi baš od neke koristi taj patch, s obzirom da mi ispod tog sata se vidi klasični sat (onaj koji je uvijek na ekranu).
Možda se još malo budem zezao s time ako budem imao vremena.