Otključavanje MPX200

[Inovator]

flashajte svoj mobitel priloženim *.img fileom i to je to.


note: osobno nisam u stanju isprobati, stoga ne odgovaram za moguće nuspojave

[demosthenes]

A sta konkretno otkljucava taj *.img?

[Inovator]

A sta konkretno otkljucava taj *.img?

ajd pogodi...
ako kupiš mpx zaključan na neku mrežu, recimo D2 u Švabiji, ovime ga otključaš...
kapiraš?

[T97V]

Posto se AT&T verzija telefona moze otkljucati na drugi nacin a mreza je siromasna sa odasiljacima na 1.8 i nema svugdje signala...a 900 zakljucavaju ..pa da li i to moze? konkretno moj slucaj...radi ali bez 900...

[Inovator]

Posto se AT&T verzija telefona moze otkljucati na drugi nacin a mreza je siromasna sa odasiljacima na 1.8 i nema svugdje signala...a 900 zakljucavaju ..pa da li i to moze? konkretno moj slucaj...radi ali bez 900...

hm, ne znam da li uopće AT&T verzija podržava 900 MHz....odnosno da bi se to moglo na ovaj način otvorit

[T97V]

Na vrlo rijetkim stranicama sam pronasao ovo...
can some1 check it out and see if it works???
Exclusive to AT&T MPX200 owner.

The 900mhz Band, is now can be unlocked. All the AT&T MPX200 actually triband, but has been locked. The network lock appeared at the last 256KB of Flash data. Be carefull because this region also contained IMEI #.

To remove the network lock you need a software and it can be found at:

__________________

I sucessfully enabled the 900Mhz Band on my AT&T mpx200. Please follow the steps:

1. backup the final 256kb of phone flash using MPX200_Backup. Name it as orig.raw
---> a) prepare your set in flash mode.
----> cool.gif connect to the pc
----> c) run the MPX200_backup
----> d) if dialog appear before the interface, try to change to another usb port.
-----> e) if no dialog, then proceed to click on 256KB
-----> f) save as orig.raw
-----> g) click the first button and wait till finish.
2. edit

3. Convert the fix.raw to bin file using raw2bin.
-----> C:\raw2bin fix.raw fix.bin
4. Convert the fix.bin to fix.img using MPX200_Backup.
5. Flash the fix.img to your MPX200 set using Motorola upgrade wizard.

How to prove the 900mzh is unlocked,
press *#**364# and dial at your MPX200 in order to enter the "Engineering mode", press option --> 2RR --> 1 Cell Information --> Summary. You will see "arfcn" at the top left hand corner. It's the indication for the signal you can receives. If you found those numbers below is less than 00500, congratulation !! You got 900mzh!! But if the figures show more than 00500, that means it's only receive 1800mhz only......

Trazim komentar i ako je netko probao da se javi...